Date & Time:
 

* Supporting high speed CD-Audio playback
* Supporting high speed Digital Audio Extraction
* Supporting Plug and Play
* Quality rivals that of Japanese-made drives
* Compatible with all kinds of CD formats
* PC 99 Certified
* Vertical mounting available
* User friendly audio play/skip track from front panel button
* Power saving
* Emergency ejection hole
* Small CPU utilization
* Plug and Play

INTERFACE/BUS
E-IDE/ATAPI

TRANSFER RATE
Data : 52X max CAV (3300 ~ 7800k bytes/sec. (Mode 1))
Burst: PIO mode 4 (16.6M bytes/s max.)
Single-word DMA mode 2 (8.3M bytes/s max.)
Multi-word DMA mode 2 (16.6M bytes/s max.)
Ultra DMA/33 mode (33.3M bytes/s max.)

ACCESS SPEED
80ms

CACHE BUFFER
128KB

FRONT PANEL
Open/Close/Stop button
Audio Play/Skip button
Volume control knob
LED indicates POWER ON & BUSY
Emergency ejection hole

AUDIO
Number of Channels : 2 (Stereo)
Distortion : 0.2 % max. (at 1kHz)
Signal to Noise Ratio: 70dB
Output Levels - Headphone: 0.7 V rms typical
- Line out: 0.7 V rms typical
Output terminals - Headphone: 3.5 mm
- Line Out: Jack 4-pin Terminal
- Digital out: 2-pin Terminal

O/S SUPPORT
DOS 6.xx, Windows 3.x, Windows 95, Windows 98, Windows NT, Windows XP, Netware, SCO UNIX, OS/2 Warp MPC level 3 compatible.

MTBF
120,000 POH

SIZE
5.75"w x 1.63"h x 7.9"d

__________________________________________________________________________________

Non-drop frame SMPTE time code on auxilary track 2 (should be continuous and must not cross over 00:00:00:00 during program).
Program must not start any earlier than 20 seconds into tape (SMPTE time).
PQ burst (optional) on auxiliary track 1 (at about :15).
On tapes without a PQ burst, a track sheet should be provided with your master media
__________________________________________________________________________________

   
   
DigitalME - 2006 . Read Privacy Polity Terms and conditions